$90.00
EPA Section 608 certification REQUIRED for purchase.
This product is regulated under the Clean Air Act and is restricted to licensed HVAC professionals and EPA-certified technicians only.
DOT HazMat Compliance: All refrigerant shipments comply with DOT hazardous materials regulations (49 CFR). Commercial delivery address required.
HFO/HFC blend for R-404A replacement with significantly lower GWP. Excellent for commercial refrigeration retrofit.
R‑449A – Next‑Gen HFO/HFC Blend for Low & Medium Temperature Refrigeration 🌱
Category: Hydrofluorocarbon/Hydrofluoroolefin (HFC/HFO) blend — a zeotropic refrigerant engineered as a drop-in replacement for R‑404A and R‑507.
✅ Key Highlights & Environmental Profile
Zero ozone depletion (ODP = 0) — chlorine-free blend safe for the environment
Global Warming Potential: Approximately 1,397 (AR4) — about 64% lower GWP than R‑404A (~3,922)
Safety Rating: ASHRAE A1 — non‑flammable, low toxicity
Low glide (~4 K) zeotropic blend — requires liquid-phase charging
🛠️ Blend Composition
R‑32 (Difluoromethane): ~24%
R‑125 (Pentafluoroethane): ~25%
R‑134a (Tetrafluoroethane): ~26%
R‑1234yf (Hydrofluoroolefin): ~25%
theengineeringknowledge.com
⚙️ Technical Specifications
Property R‑449A / Opteon™ XP40
Boiling Point (1 atm) ≈ –46 °C
Critical Temperature ≈ +81.5 °C
Critical Pressure ≈ 44.5 bar (≈4,447 kPa)
Molecular Weight ~87.2 g/mol
Vapour Pressure @25 °C ~12.75 bar
Liquid Density @21 °C ~1,113 kg/m³
Glide ~4 K
🌟 Benefits & Applications
Retrofit & New Systems: Ideal replacement for R‑404A/R‑507 in DX low/medium-temp refrigeration — supermarkets, cold-rooms, condensing units, display cases, transport refrigeration
Seamless Retrofit: Compatible with existing POE-oil systems and hardware; no major equipment changes — just liquid charge and TXV adjustments
Improved Efficiency: Field tests show 8–12% energy savings at medium temps, 2–3% at low temps, plus similar or higher cooling capacity than R‑404A
Sustainability Compliant: Meets F‑Gas and SNAP regulations — GWP < 2,500; promotes reduced environmental impact
📌 Why Choose R‑449A / Opteon™ XP40
Drop‑in efficient retrofit for R‑404A/R‑507 systems.
Significant GWP reduction (~64%) with no ozone impact.
Safety-assured non-flammable A1 rating.
Operational savings via enhanced energy efficiency.
Supported globally by OEMs and refrigerant providers
📦 Handling & Storage
Always charge in liquid phase to prevent blend fractionation
National Refrigerants, Inc.
Store in well-ventilated, cool areas; vapours are heavier than air
Gas Servei
Use with POE oil only — mineral oil incompatibility could harm performance
📞 Order Now from AlperRefrigas
Available in 9 kg, 46 kg, 45 kg cylinders (per regional stock) with dual-port valves
Includes full access to SDS, charging charts, retrofit guides, and certified technical support
Ideal for certified HVAC professionals transitioning to eco-friendly refrigerants
R-404A Replacement
Commercial Refrigeration
Supermarket Systems
Lower GWP
R-449A Refrigerant Gas | Alper Refrigerant Gas is a HFO refrigerant widely used across residential, commercial, and industrial HVAC-R systems. It is compatible with a broad range of equipment from major manufacturers and is suitable for both new installations and retrofit applications.
| Specification | Value |
|---|---|
| SKU / Part Number | R-449A |
| Brand | OEM |
| Category | HFO |
| Chemical Formula | R-32/R-125/R-1234yf/R-134a |
| Hazard Class | A1 |
| Shipping Weight | 30 lbs |
| EPA Approved | Yes |
| Availability | In Stock |
Reviews
There are no reviews yet.